General Discussion

Timing Analysis leads to wisdom (4)
Lattice iCEcube2 Windows installer? (1)
Tinyprog 1.0.24 testing (1)
Issues with tinyprog -u on BX (17)
Chip-8 games console (2)
Using Apio/Atom with PLL changes on the BX - need an example project (13)
Customs Charges: UK (5)
Vurious errror message in ATOM from apio (1)
C API for riscv32-unknown-elf-gcc (3)
How do I generate the clock for VGA? (2)
Bootloader not active (3)
DVI / HDMI Pmod (7)
TinyFPGA B2 doesn't complete programming (1)
Why not use a 48MHz oscillator on the BX? (1)
Running only a single testbench with `apio sim` (5)
Check resource utilization (2)
Project Icestorm on Windows (4)
Enabling pullups for mulitple pins at once (2)
Tomu FPGA: An FPGA board that fits inside your USB connector (2)
Binary (.bin) file for the B2 bootloader? (19)
Experiments with BX programmer and bootloader (9)
PicoSoC using only BRAM (8)
TinyFPGA BX reference card? (2)
Noob: boot from flash on TinyFPGA-bx (5)
Lattice 1032 e 100 lj (1)
Min/max possible generated PLL clock for BX? (1)
20MHz clock for 10Base-T ethernet? (3)
USB-to-UART verilog module for BX (1)
Joris full speed USB CDC (ACM), full speed pullup resistor (3)
Crowdsupply campaign - shipping arrival (4)