Input a large amount of data with tinyFPGA BX



Thanks in advance for any advice!

I have my TinyFPGA with a wireless interface, and I was wondering what the would be the best approach to transmit a large amount of (known) data.
(right now I have the data hard-coded as: assign data[i] = 126’b 0101…0

I need ~60kbytes of data, and that of course does not fit in the tinyFPGA RAM.



Hi yaki,

For that much data you’ll probably need an external memory like an EEPROM (e.g. or an SD card.

Good luck with your project!


or you can use flash memory.